CorruBracket is ideal for mounting snow guards and other heavy-duty applications to corrugated roofing. Compatible with the PVKIT® for direct-attach™ solar PV mounting when there is an underlying wood deck. This metal roof bracket can also be used with railed mounting.
Fastened through the roof panel and into the structure, CorruBracket utilizes two to four fasteners specifically designed to outlive the roof.
Note: CorruBracket must be mounted directly over and into the supporting structure of the roof, (i.e. wood decking, wood or steel purlins or trusses) – NEVER into the metal roofing material alone.
With no messy, field-applied sealants, there’s no chance for leaks. CorruBracket comes with factory-applied, butyl sealant already in the base. The part design conceals the sealant, preventing UV degradation and over-compression of the sealant when fasteners are secured.
CorruBracket has been rigorously tested normal-to-seam (pull-up) and parallel-to-seam (drag load) for load-to-failure results on wood decking, metal, and wood purlins.
Due to the various mounting applications, CorruBracket screws and bolts are offered separately through distribution or direct.
Be sure to check out the many other features on the bracket overview page.
Exposed-Fastened, Corrugated
CorruBracket fastens in the low (or between the ribs), through the deck into the structure and accommodates a rib pitch of +/- 2.67” (68 mm).
No surface preparation is necessary. Simply wipe away excess oils and debris; peel the release paper, align and apply.
CorruBracket is mounted directly into the supporting structure of the roof (i.e. roof decking, and wood or steel purlins). Secure through the pre-punched holes using the appropriate screws for the supporting structure.
*See more detailed installation instructions in the PDF below.
Submit your information by clicking the form below, and we’ll get back to you almost immediately.
