CorruBracket™ 100T

CorruBracket 100T is the right way to attach almost anything to 7/8” and 3/4” (h) x 2.67” rib-pitch corrugated metal roof profiles common in North America, including solar panel mounting via rail or DirectAttached™ methods.

CorruBracket 100T Mini

CorruBracket 100T Mini is a bit shorter than its standard counterpart and has two pre-punched holes in its base rather than four. The Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!*

*S-5!® Mini brackets are not compatible with, and should not be used with, S-5! SnoRail™/SnoFence™, ColorGard®, or X-Gard™ snow retention systems.


Installation is Easy

CorruBracket 100T is mounted directly into the crest of the corrugation, straddling the valley. No surface preparation is necessary; simply wipe away excess oil and debris, align and apply. Secure directly into the crest of the corrugation by driving the appropriate screws into the pre-punched holes, or pre-drilling the proper-sized hole through the pre-punched holes and riveting. The slotted top hole, which accommodates standard M8 nuts and bolts, simplifies alignment and maximizes flexibility in attaching ancillaries.


Please note: The above image illustrates the CorruBracket 100T. The steps remain the same for the CorruBracket 100T Mini; however, there will only be two fasteners used.

Load Test Results

CorruBracket 100T Mini Load Test Results


Contact your distributor for pricing and ordering.

Product packages in boxes of 90 and cases of 360.
Broken box quantities may incur additional charges.