The S-5-H clamp was specifically developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam. The S-5-H is unique in that it allows for attachment to a horizontal seam on the vertical leg of the seam.
S-5-H Mini Clamp
The S-5-H Mini is a bit shorter than the S-5-H and has one setscrew rather than two. The Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!*
*S-5!® mini clamps are not compatible with, and should not be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow retention systems.
No More Mini Bolt – Effective April 1, all S-5! mini clamps will be packaged without M8 bolts. Please check with your distributor for additional information.
Installation is Easy
The clamp’s two-piece design allows it to be installed anywhere along the length of the rib, making installation fast and easy! Just place the clamp on the seam, slide the insert piece into place, and tighten the setscrew. After the clamp is installed, affix ancillary items using the top stainless steel bolt provided. Go to the tools page for information and tools available for properly attaching and tensioning S-5! clamps.
The strength of the S-5-H Mini clamp is in its simple design. The setscrew will slightly dimple the metal seam material but will not puncture it—leaving roof manufacturers’ warranties intact.
Please note: The above image illustrates the S-5-H. The steps remain the same for the S-5-H Mini; however, there will only be one setscrew on the clamp.
Load Test Results
Contact your distributor for pricing and ordering.
Product packages in boxes of 25 and cases of 125.
Broken box quantities may incur additional charges.
Setscrews, flanged bolts and a screwgun bit tip are included in each box.