S-5-N 1.5 Clamps

S-5-N 1.5 and S-5-N 1.5 Mini clamps were designed with S-5! zero-penetration technology for application on the popular 1.5″ nail strip metal roof profiles and roofing types with similar profiles.

NOTE: MSRP pricing has been reduced on the “N” family of clamps. Please contact your distributor for current pricing. 

S-5-N 1.5 Mini Clamp

The S-5-N 1.5 Mini is a bit shorter than the S-5-N 1.5 and has one setscrew rather than two. The Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!*

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow retention systems.

No More Mini Bolt – Effective April 1, all S-5! mini clamps will be packaged without M8 bolts. Please check with your distributor for additional information. 

S-5-N 1.5 Mini Clamp

Installation is Easy

The clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.5 Mini to engage the triangle-type profiles during the installation process—there is no longer a need to hold the clamp in place while the setscrew is tensioned. The combination of these two features allows the clamp to sit straighter on the seam. Go to the tools page for information and tools available for properly attaching and tensioning S-5! clamps.


Please note: The above image illustrates the S-5-N 1.5. The steps remain the same for the S-5-N 1.5 Mini; however, there will only be one setscrew on the clamp.

Load Test Results

S-5-N 1.5 Mini Load Test Results


Contact your distributor for pricing and ordering.

Product packages in boxes of 40 and cases of 200.
Broken box quantities may incur additional charges.

Setscrews, flanged bolts and a screwgun bit tip are included in each box.