With the CorruBracket 500T PV, the “500” bracket designation refers to metric dimensioning. See the “100” for imperial compatibility.
The 500T PV is designed to be paired with the S-5-PVKIT for direct-attach™ solar mounting. The 500T PV features a slotted hole for 25 mm of adjustability, as well as an open channel for wire management.
Choose the 500T PV for mounting to 16-22 mm (H) x 76 mm rib-pitch corrugated roofing profiles.
Attachment Versatility
The 500T PV fastens into the sheeting-only (self-piercing screws provided), allowing you to position the metal roof bracket anywhere along the roof ribs. You can also use the 500T PV for attachment of solar inverters and/or optimizers. The bracket’s “V” configuration helps prevent crushing of the ribs when PV modules experience down-force such as snow loads.
Be sure to check out the many other features on the bracket overview page.
Exposed-Fastened, Corrugated
CorruBracket 500T PV fastens in the high (or on top of the ribs) out of the water plane. Fix into sheeting-only. The 500T PV accommodates a rib pitch of +/- 76 mm (3”).
No surface preparation is necessary. Simply wipe away excess oil and debris, align and apply.
Secure bracket directly into the crest of the corrugation by driving the provided screws into the pre-punched holes or by pre-drilling the proper-sized hole through the pre-punched holes and riveting. The slotted top hole accommodates standard M8 nut connections.
*See more detailed installation instructions in the PDF download below.
Submit your information by clicking the form below, and we’ll get back to you almost immediately.
