Skip to main content

S-5-PVKIT® HUR 2.0

Rail-Less Metal Roof
Solar Mount

The Direct-Attach™ Solution for Standing Seam and Exposed-Fastened Metal Roofs 

S-5-PVKIT HUR 2.0 Brochure

Get Your Solar Mounting Checklist

Use it to guide your next project through layout, design, cost, project logistics and aesthetics.

View

An enhanced version of the original PVKIT® rail-less, solar mounting solution for metal roofs, S-5-PVKIT HUR 2.0 (High Uplift Resistance) is a first-of-its-kind PV mounting system specifically designed for high wind uplift performance of installed solar panels and is approved to FM 4478.

Designed to withstand extreme wind uplift forces such as hurricane forces, as well as heavy snow loads, the 6" (152 mm) length of the overhead grabs, providing a larger contact area with the top of the PV module’s frame. This prevents it from releasing as the module frame bows under extreme forces. A new contact surface design and angle also increases the grip on the frame. The new baseplate design further prevents the module from bending and disengaging under high wind uplift forces. Together, these features improve the structural integrity of the module-to-roof attachment.

                   

S-5-PVKIT HUR 2.0 Features

• Increases wind uplift resistance of mounted solar modules - 150 psf rating

• Gravity (snow) load strength - 120 psf rating

• Reduces added dead load of mounting components

• Improves load distribution by 25% reducing point loads

S-5-PVKIT HUR 2.0 Works for the Following Roof Type:

Spacer

Exposed-Fastened

Spacer

Standing Seam

Spacer

Corrugated

S-5-PVKIT HUR 2.0 Components

PVKIT HUR Mid (Includes PV Disk)

Attachment for exposed-fastened roofing. See specific product pages for critical dimensions to ensure correct bracket selection.

PVKIT HUR Edge (Includes PV Disk)

Used at edges of array to attach modules to rooftop clamp or bracket leaving a clean finished look.

Compatible S-5! Bracket

Attachment for exposed-fastened roofing. See specific product pages for critical dimensions to ensure correct bracket selection.

(Pictured: ProteaBracket™ for exposed-fastened, trapezoidal rib metal roofing. Visit our bracket overview page to view additional attachment solutions.) 
 

Compatible S-5! Clamp

For use on standing seam profiles. See individual pages to select the best attachment solution for your metal roof profile.

(Pictured: S-5-S.  Visit our clamp overview page to view additional attachment solutions.)
 

Have More Questions?

Submit your information by clicking the form below, and we’ll get back to you almost immediately.

FAQs

What spacing should be used with S-5! clamps for PV assemblies?
Can S-5! clamps be used as a grounding path to the roof?
How much load will S-5! clamps hold?
Should I be concerned about metallurgical compatibility?
TO TOP
Project Dashboard & Product Downloads

Configurator

Recent Snow Projects

Recent Solar Projects

Product Downloads